CdB Forum
CdB Whitewater Paddling Club Discussions => Paddling => Topic started by: FeinDenz on July 10, 2013, 05:08:32 PM
-
To the Executive in Charge of Technical Fix-Ups (Fix with an i not a u...) (ECT F-U):
If I bring my virgin Fluid Nemesis kayak this weekend, what "stuff" should I use to position & fix the foam-rubber inserts? Carpet tape or an approved glue of some sort? Thank you.
Denzil
-
Never had to glue anything in my Nemesis Denzil but for the option of repositioning I would say duct tape or two sided tape.
Paul EXFU :o
-
Never had to glue anything in my Nemesis Denzil but for the option of repositioning I would say duct tape or two sided tape.
Paul EXFU :o
Permanent: contact cement, not the water-based stuff however. And read the instructions! For other things, duct tape does fine. EXFU what?
-
If you need to glue it to the plastic you will need to rough it up first with sand paper or it won't stick, then use contact cement.
-
Never had to glue anything in my Nemesis Denzil but for the option of repositioning I would say duct tape or two sided tape.
Paul EXFU :o
Permanent: contact cement, not the water-based stuff however. And read the instructions! For other things, duct tape does fine. EXFU what?
Exec Member in Charge of Fix Ups ::)
-
Merci, mes amis, I'll bring duct tape while positioning to get comfy in the Fluid.
Denzil